Perancangan jaringan point to multipoint menggunakan metode prepare, plan, design, implement, operate, dan optimize (ppdioo) (studi kasus: gedung u2c lantai 4 universitas teuku umar). Rancang jaringan Point to Multipoint (PTMP) di Universitas Teuku Umar menggunakan metode PPDIOO. Analisis QoS throughput, delay, jitter, dan packet loss untuk koneksi stabil di lingkungan akademik.
Penelitian ini bertujuan untuk merancang jaringan Point to Multipoint (PTMP) dengan menggunakan metode PPDIOO (Prepare, Plan, Design, Implement, Operate, Optimize) di Laboratorium Jaringan Universitas Teuku Umar. Jaringan PTMP dipilih karena kemampuannya untuk menghubungkan banyak perangkat dari satu titik pusat, yang dinilai efektif untuk kebutuhan koneksi dalam lingkungan akademik. Pada penelitian ini, perangkat yang digunakan meliputi Router Mikrotik dan Access Point, serta software pendukung seperti Winbox, Cisco Packet Tracer, dan Wireshark untuk mengonfigurasi dan mengukur kualitas jaringan. Pengujian dilakukan dengan mengalokasikan bandwidth sebesar 9 Mbps ke tiga access point yang masing-masing mendapatkan 3 Mbps, guna memastikan performa dan stabilitas jaringan yang optimal. Hasil pengujian menunjukkan bahwa kualitas layanan jaringan dapat diukur dengan parameter Quality of Service (QoS) seperti throughput, delay, jitter, dan packet loss. Berdasarkan analisis, konfigurasi jaringan berhasil memenuhi standar kualitas yang diharapkan, dengan penyesuaian dilakukan pada tahap optimasi untuk mencapai hasil maksimal. Metode PPDIOO terbukti efektif dalam membangun dan mengelola jaringan PTMP, terutama dalam mengatasi masalah terkait kestabilan koneksi. Penelitian ini diharapkan dapat menjadi acuan dalam pengembangan jaringan serupa di lingkungan institusi pendidikan dan mendukung peningkatan kualitas layanan jaringan di berbagai sektor.
The paper, titled "Perancangan Jaringan Point To Multipoint Menggunakan Metode Prepare, Plan, Design, Implement, Operate, Dan Optimize (PPDIOO) (Studi Kasus: Gedung U2C Lantai 4 Universitas Teuku Umar)", presents a clear and relevant objective: to design a Point to Multipoint (PTMP) network using the structured PPDIOO methodology. The choice of a PTMP network for an academic environment, specifically the Universitas Teuku Umar's network laboratory, is well-justified given its efficiency in connecting multiple devices from a central point. The abstract effectively introduces the practical context, the key devices (Mikrotik Router, Access Points), and the software tools (Winbox, Cisco Packet Tracer, Wireshark) employed, providing a foundational understanding of the study's scope and approach. The research effectively leverages the PPDIOO framework to systematically address network design challenges. The abstract outlines a practical implementation, including the allocation of 9 Mbps bandwidth distributed across three access points, and the subsequent evaluation using established Quality of Service (QoS) parameters such as throughput, delay, jitter, and packet loss. The reported success in meeting expected quality standards through analysis and optimization phases highlights the efficacy of the PPDIOO method in achieving a stable and performant network. This methodical approach to configuration and testing underscores the robustness of the proposed solution for the specified academic setting. While the abstract clearly articulates the study's achievements, a more detailed presentation of the quantitative QoS results (e.g., specific values for throughput, delay, jitter, and packet loss obtained) would significantly enhance the paper's impact and allow for a more objective assessment of "meeting expected quality standards." Further elaboration on the specific activities undertaken in each PPDIOO stage, beyond just "design," "implement," and "optimize," would also strengthen the methodological contribution. Nevertheless, this research provides a valuable blueprint for developing similar PTMP networks in educational institutions, demonstrating the practical utility of the PPDIOO methodology for improving network service quality in various sectors.
You need to be logged in to view the full text and Download file of this article - Perancangan Jaringan Point To Multipoint Menggunakan Metode Prepare, Plan, Design, Implement, Operate, Dan Optimize (PPDIOO) (Studi Kasus: Gedung U2C Lantai 4 Universitas Teuku Umar) from Jurnal Teknologi Informasi .
Login to View Full Text And DownloadYou need to be logged in to post a comment.
By Sciaria
By Sciaria
By Sciaria
By Sciaria
By Sciaria
By Sciaria